In this article of Mechanicalland, we will show how to draw 3-Point Arc in Autocad. So, it is a very useful command in Autocad that you can establish your arcs by selecting three points in the drawing scheme. Furthermore, you can find detailed information about how to use the 3-Point arc command, and what are the features of this command in Autocad.
How to Use This Command in AutoCAD?
Firstly, to draw an arc by selecting three points in the drawing scheme of Autocad, click on this command as shown by the red arrow above.
After that, specify the first point as shown by the red arrow above in Autocad.
And then, the arc will be shown as above, and you can put your third point with your cursor. The arc will be shaped according to this third point selected in Autocad.
So, we selected our third point in the 3-Point Arc command as shown by the red arrow above. Our Arc is created in Autocad.
After that, you can select the Center option as shown by the red arrow above in the 3-Point Arc command.
After clicking on the Center option in Autocad, you select the Center of arc first as shown by the red arrow above.
After selecting the Center point of the 3-Point Arc in Autocad, select the starting point as shown by the red arrow above, then select the ending point of the arc as shown by the green arrow above.
The arc was created as above. This Center option of the 3-Point Arc command of Autocad provides the selection of center first, then placing the arc properly by selecting starting and ending points.
Conclusion on 3 Point Arc Command in Autocad
Finally, drawing Arcs with 3-Point Arc is very easy like that in Autocad.
So, do not forget to leave your comments and questions below about the 3-Point Arc command in Autocad.
Your precious feedbacks are very important to us.
NOTE: We use all the screenshots and images for educational and informative purposes. Images used courtesy of AutoCAD®.
Above all, Autocad provides various kinds of other useful commands and features. You can check them below.