Home » All Programs » Dimensioning Commands And Explanations In AutoCAD 2D

# Dimensioning Commands And Explanations In AutoCAD 2D

In Autocad 2D, you can create your technical drawings in a very effective way. As you know that, in technical drawings, you need to define the all the dimensions, lengths, angles etc. In Autıcad 2D, this thing is very easy. You can learn the all Autocad dimensioning commands in Mechanicalland, by clicking and reading given articles below.

## Dimensioning Commands In AutoCAD 2D:

• Linear Dimensioning Command In Autocad: For linear objects or lengths in Autocad 2D, this dimensioning option is used. Click on given link and learnd how to dimension linear features in Autocad with ‘Linear’ command.
• Aligned Dimensioning Command In Autocad: For inclined features that drawn in Autocad 2D, you can use ‘Aligned’ command. This command dimensions inclined and linear feature’s exact length, not horizontal or vertical length only, as ‘Linear’ command. Click and learn how to use ‘Aligned’ command in Autocad to dimension inclined linear features.
• Angular Dimensioning Command In Autocad: To dimension angles in Autocad, you can use ‘Angular’ command. Angular features’ dimensions will be in degrees unit in Autocad. Click and learn about ‘Angular’ command in Autocad.
• Arc Length Dimensioning In Autocad: In a case that you need to give exact arc lengths of round entities in Autocad 2D, you need to use this ‘Arc Length’ command. Click and learn about ‘Arc Length’ dimensioning command in Autocad.
• Radius Dimensioning Command In Autocad: In most technical drawings, you need to define diameter values instead of radius values. You can do this thing in Autocad with ‘Diameter’ command. Click and learn about ‘Diameter’ command in Autocad 2D.
• Ordinate Command In Autocad Dimensioning: If you need to give ordinate information of a point in Autocad 2D drawing scheme, you can use ‘Ordinate’ command. If you want to learn about ‘Ordinate’ command in Autocad, just click on given link.
• Jogged Command In Autocad: If you have low place on your technical drawing sheet, and you need to define a radius or diameter value of a round object, you can use ‘Jogged’ command to save from place. Click and learn how to use ‘Jogged’ command in Autocad 2D.