Line is one of the most basic commands in Siemens NX drawing. It can sound very easy to draw line in Siemens NX but we will explain all the aspects of drawing line in Siemens NX with a very basic examples below.
How To Draw Rectangles Line In Siemens NX Sketching?

Drawing lines is very easy process in Siemens NX sketching. But you need to open an active sketch in Siemens NX. In this active sketch, you can draw your lines. To do it, click on ‘Line’ command as shown by red arrow above.

As you see above, there are two types of line drawing method in Siemens NX. Also you can draw your lines by clicking on required points in drawing window. But also you can manually enter the input values to draw your line segments.
YOU CAN LEARN SIEMENS NX IN MECHANICAL BASE; Click And Start To Learn Siemens NX!
For example, we selected the second input mode as shown by red box above. In this first input mode, you can draw your lines by entering length of it and angle of it as shown in green box. After entering your length value, press ‘Tab’ button and enter the angle value for your line segment.

In other method to draw line segments in Siemens NX, you can draw your lines by entering X and Y coordinates as shown in red box above. The first point is located and the end point of your line wiil be in the point that you entered X and Y values for it.
Drawing lines in Siemens NX is very simple like above. Do not forget to leave your comments and questions about drawing lines in Siemens NX below. Your precious feedbacks are very important for us.
Leave a Reply