Rectangle Drawing In AutoCAD(Illustrated Expression)

Rectangles are very important elements of technical drawings. You can also obtain various kinds of geometric shapes or other shapes from rectangles. In this article of Mechanicalland, we will show you how to draw rectangles in Autocad with Rectangle command.

How To Draw Rectangles In AutoCAD?

Click on ‘Rectangle’ command in Autocad.

To draw rectangles in Autocad, you need to click to open the ‘Rectangle’ commadn as shown by red arrow above.

Click to define first and second diagonal points to draw rectangle in Autocad.

After entering to the ‘Rectangle’ command in Autocad, click to select the first point as shown by red arrow above then click to define the second diagonal point as shown by green arrow in Autocad.

Select the ‘Chamfer’ option in ‘Rectangle’ command in Autocad.

You can click to ‘Chamfer’ option as shown by green arrow in ‘Rectangle’ command to draw chamfered rectangle geometries in Autocad.

Enter the first Chamfer value in Rectangle command.

Enter the first chamfer value for the rectangle as shown by green arrow above then press enter.

Enter the second Chamfer value in Rectangle command.

Enter the second chamfer value for the rectangle as shown by green arrow above then press enter. Then draw your rectangle.

The chamfered Rectangle in Autocad.

So we obtained automatically chamfered rectangle geometry in Autocad.

Select ‘Fillet’ option for rectangle in Autocad.

Also you can click on ‘Fillet’ option as shown by green arrow in Rectangle command to obtain filleted rectangle geometries in Autocad. Like in chamfered rectangle, you need to enter a fillet value then draw the rectangle.

Filleted rectangle geometry in Autocad.

As you can see, we obtained filleted Rectangle geometry in Autocad.

Click on ‘Width’ option as shown by green arrow in ‘Rectangle’ command.

Also you can click on ‘Width’ option in Rectangle command to enter a lineweigth value to your rectangle, as in ‘Chamfer’ option.

Lineweighted rectangle with ‘Width’ option in Rectangle command.

So you can see the ‘Width’ option is used for above rectangle.

Adjust Area, Dimensions and Rotation of your rectangle in Autocad.

After th eentering the command and selecting the first corner, you can adjust your rectangle from below menu as shown by green box above.

Area: You can obtain the rectangle by entering an area value in Autocad.

Dimensions: You can create the rectangle by entering heigth and width values oh the rectangle respectively.

Rotation: You rotate the rectangle as shown above by entering an angle value in Autocad.

So it is very basic to draw rectangle in Autocad.

Leave your comments and questions below!

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *