Home » All Programs » Scaling Objects In Siemens NX(Illustrated Expression)

Scaling Objects In Siemens NX(Illustrated Expression)

Scaling is very important and useful feature of Siemens NX CAD to obtain real 3D geometries from scaled technical drawings. In this article, we will explain how to make bigger or smaller 3D geometries in Siemens NX with ‘Scale Body’ command, with a very basic example below.

How To Use ‘Scale Body’ Command In Siemens NX?

Click on ‘Scale Body’ command in Siemens NX.

To increse or decrease the scales of a 3D body in Siemens NX, click on ‘More’ pop-up menu as shown by red arrow above, then click on ‘Scale Body’ command as shown by green arrow.

Select a 3D geometry to scale in Siemens NX.

After entering into the ‘Scale Body’ command in Siemens NX, click to select bodies to scale as shown by red arrow above, then specify a point that will be the scale reference point from which the scaling will done according to that point as shown by green arrow. Then you can enter a scale factor that the dimensions of 3D geometry will be multiplied with this factor. If you done with the adjustments in ‘Scale Body’ command, click on ‘OK’ or ‘Apply’ button.

Select the ‘Axisymmetric’ option for ‘Scale Body’ command.

If you select the ‘Axisymmetric’ option for ‘Scale Body’ command as in red box above, you need to specify a vector as shown by red arrow that you can give a special scaling factor along that vector. You need to specify a reference point again as shown by green arrow. Then you can give ‘Scale Factor’ along selected axis and other directions in green box. If you done, click on ‘OK’ button.

Scaling with ‘Axisymmetric’ option.
Select ‘Non-uniform’ option for scaling.

Aıf you select the ‘Non-uniform’ option for scaling as in red box above, you need to specify scaling factors separately for each coordinate system as in green box. You can also select another coordinate system to scale your geometry as shown by green arrow above.

Click on ‘OK’ to complete the scaling operation in Siemens NX.

Do not forget to leave your comments and questions about ‘Scale Body’ command in Siemens NX below!

Comments

One response to “Scaling Objects In Siemens NX(Illustrated Expression)”

Leave a Reply

Your email address will not be published. Required fields are marked *


Please

leave feedback ?

( For the post )

ASK THE MECHANICALLAND

COMMUNITY


We are always open to your feedback to improve ourselves and the quality of our content! If you have any suggestions, thoughts, or criticism, please let us know. We are trying to improve our blog with constructive feedback. We are aware of how valuable your feedback is for our future development, and we will carefully read all your comments. Thank you in advance!