Water Overflow Problem and Solutions

In our homes, there are different kinds of water systems and sewages that have overflow pipe or overflow system. Sometimes they can leak because of the water overflow on them. Here, we will explain the general causes that the overflow take place. And you can find the general solutions for them to these systems. General systems that have water overflow pipes;

• Toilet cisterns,
• Sinks,
• Cold water feed anf expansion tank,
• Central heat feeding
• Copper cylinder
• Boilers

You can find all the problems and solutions that are related to these systems that you have in your home. Different kinds of these systems can make water leak to your home. So you need to identify which system leak water from it.

In general if the floor of your bathroom is filled with water, you need to check the toilet overflow in general. And also if the water comes from teh top of your home, you probably have problem with the central heat feeding, copper cylinder and boiler.

Water Overflow Problem in Toilet Cisterns

Toilet cisterns are very important systems that provide water to clean up the toilet. And there is a automated system that drains and fill the cistern with water. And once you push the button of the toilet cistern, it flushes the water inside the cister. And cisteern autmatically fulls with water.

And also there is a water overflow pipe that extends from your cisternt to the sewage system that you have. If the water level exceeds the overflow pipe level, the water will overflow over the cap of the cistern.

If there is a water overflow from the toilet cistern, you probably have problem with the toiler cistern water overfdlow system.

Check the Float Valve

Float vaşves are important parts ofthe toilet cistern systems. If there is a water opverflow from your toilet cistern, you need to check if the float valve works well or not. Float valves are the valves that have plastic baloon that floats at the top of thwe water in yout toilet cistern. And it is lined with the water valve that provides water in your toilet cistern. Once the water level reaches to a specific level, the float valve closes the valve with the lifting force that water provides.

Before applying the solutions below you need to drain the wate rinside the toilet cistern. To do it, you need to close the water feed insşide the toliet cistern from isolation valve that provides water. And also, you need to drain teh water inside th toilet cistern by using a bathroom tap. After thati you can deal with teh float valve system that works well.

So, there is a link betwene the floating baloon and the valve. The lengh of this link is very important to deifne the water level. If the lngth is more for the water level, you can decrese the link length by bengind the lebngth of the link below to the water overflow level.

And also, there can be problem with the float valve ballon. If the floating valve damaged becasue of some effects, it can fill with water. So, float valve can not do its job properly. So, you need to change the flow valve system in your toilet system.

Last one, the link may be made from the metal link system. If there is a tangling of the chain in the drain water, you need to check the general link system and and solve this tangling to work the float valve valve.

Water Feed Pressure

Maybe, the water feed pressure is very high to prevent the working of the float valve. And the float lfitng force can not close the valve because of the very high pressure of water feed inside the cistern. So, you need to decrease the water pressure by adjusitng the isolation valve in a specific degree. And check if the float valve works well in this condition. After that, you can easily make teh different adjustments.

Float Valve Washer

Maybe the problem is at the washer ofthe float valve. If the washer of the float valve is damaged during the time, you need to change it. Because, vale working well but the water is leakin g thorugh the valve system because of te poor washer. You need to buy a washer and change teh washer of the float valve.

It is very basic to do. You just need to detach the valve from the cistern and replace the old plastic washer with the new one.

Float Valve Replacement

This is the last chance that you ned to try. If there şs a complete damage on the floating baloon and at the floating system that the float valşve havei you nedd to cahnge the float valve system completely.

Water Overflow Problem with Taps

Taps are armatures are the genral systems that we are using to reach to the water. And there are piping and plumbin systems that provides water to the taps and the armetures thatwe have in out kitchen and in out bath.

Detecting the water overlow in kitchen is easy. Becayse the only water system thatthe kitchen have is dishwasher machine water feed and the kitchen tap. If there are problems with the kitchen tap, you need to check if the washersa re the prblematic parts in your kitchen. So, you can easily understand if the problematic part is the kitchen tap.

Change Tap Washers

First of all, you need to cles the water feed from the main vaen of your home. And change all th washers of the tap that you have. And test it by opening th vane.

Change the Taps

If chanign the washers are not wrking well to cut the water overflow, probably the essential sections of the taps can be corroded during the time. If you cahneg the tap system, you will not have any problem with the water overflow.

Decrease the Pressure of Water Feed

Maybe the presure of the water feed is very high for the generla tapo anfaucet system that yoıu have. You need to check the water pressure from the presure clock of yoru home. If it is high, you need to decrease water pressure by using the vane.

Dishwasher and Laıundry Machine Water Overflows

These are the two important machines that we are using in our home. They both have water feed from the backside of them. And you have a special piping sytemn for these two machines.

If the water connectiopn to these systems are not well, they will have water overflow and water leaks to the gfroıund. To understand it, you just need to examine the water overflow coming from your machines.

And these overflows can be very hazardous for machines that you have. And these machines will not work well.

Check teh Connections

Maybe a basic tightening can solve your problems in general. You just need to tighten the connection of the dishwasher of loundry machine to prevent the any leaks.

Change teh Connections

Over the time, maybe the connections that your machines have can be corroded and lose their work. And you need to change these water connections with the new ones. These parts are generally low in price and standard parts. You can change them by following these steps in general;

• First of all, you need to close the water feed from teh main vane that you have.
• Unplug the machine from electricity in terms of the safety.
• After closing thw water feed, you need to detach the connection that you machine have.
• And attach the mater connection with the new connection that you buy foryou machine. So it will be very easy for you to use the machine.
• Test the machine by opening the main vane if it is leaking or not. So, you can easily understand that the connections are working well.

Toilet Sink Water Overflow Problem

The water overflow system of the sinks, there is a small hole right up to the main drain hole of the sinks. And this hole connects with the main drain hole at the botom o fthe sink that you have. If water level exceeds that water overflow hole of your sink, probably there is a clooging or other problem with your sink in general.

And also, if the water overflow pipe is leaking of yopur sink, you need to open the sink bşlokage that you have. There are different ways to remove the sink blokage.

Apply Special Blokage Acids

In the market there are different kinds of sink blokage acids that you can use fo rthe sink that you have. You are adding a hot water after pouring these acis to the water overflow system of the sink that yıu have. The acid melts the blokage and the water overflow system opens.

Apply Blokage Pumps

Also, you can apply blokage pumps to your sinks. You just need to apply these blokage pumps in a good way. Apply the force and push the blokage filth in your sink system.

If these two solution to solve the blokage of your sink does not work, you need to wrok with porfesisonal people to open that blokage. Beacuse, the material of the blokage is very stubborn and you can not solve with the conventional solutiıons.

Water Overflow Problem with Central Heating Equipment

There is a central heating equipment in your bathroom. You can see it as a tank that contains water inside it. And at the top of this tank, there is a small tank that works as a water overflow. And the piping system form this tabk extends to the sewage system of the house to prevent the water overflow in your house. So,i there can be prblems with these syetsm if you are seeing problems with teh water overflow.

Check the Float Valve

Again, you can have a problem with the float valve that you have. So, you need to check the float valve of the tank that you have. The float valve can be stuck in yoru tank. And you need to adjust teh place o fthe float valve that you tabk have.

Check the Copper Coils inside the Tank

If the float valve works well, you need to check if the copper coils are working well or not. The copper coils provide hot water from the boiler to heat the wtaer inside the tank. And if tehre are damages on these coil, the hot water mixes with teh cold water. Soi this provide extra water inside the cold water system of your tank. And this leads a problem with the water overflow from your tank.

If there is a problem like this, you need to check the copper coils and replace them with the new one. You can see if there is a problem with the coils in general. So, you just need to replace them with the new copper coils.

Water Overflow Problem with Boilers

Bıilers are the systems that provide hot water to all the taps andother sink systems in your home. And ifthere is a problem with teh boiler there are safety parts that make their job.

There is a relief valve that boilers have. These relief valves are working as the relief systems for pressure buildup take place with the boilers. And the relief valve releases the high pressure water form the system to prevent any acciedents. And most of the boilers are working with hot water in general.

If there is a wate roverflow problem with your boiler, there are two causes şn general;

• The wate rif too hot thayt expands and overflows from teh system.
• Relief valve does not work well as intended.

Decrease the Pressure

To solve the water overflow porblem wişth your boiler, you need to decrease the pressure of the total boiler to prevent any accients. If you decreease teh pressure of the water inside the boiler, there is no need for the safety system that does not waork.

And you need to call profesionals to take care of the boiler system that you have. In general gas engineers are looking for the problems with the boiler systems in general.

Copper Cylinder Water Overflow

Copper cylinders are also important parts imnyour home that provides hot water to the plumbing system in your home. So, it will be very easy fo ryou to have a copper cylinder system. And you need to make a water overflow system in your home.

There are generally two causes that water overflow takes place in your copper cylinder system.

Adjust the Tempertaure

Of the temperature of the thermostat is very high for the copper cylinder, the water expands and lead to the problem of water overflow. So, you just need to decrease the temperature of the water form the thermostat. And it will decrease the temperature adn pressure to prevent the water overflow porblem.

Check teh Coils

Als there are same coils with the central heating equipment. You need to apply the same measurements with teh coils. And if there is a problem with the coils, you need to change the coils with the new ones.

General Points to Remember about Water Overflow

As you see above we explained the different aspects of the water overflow problem that you can face with the different systems that you have in your home. So, you just need to check the different kiinds of systems that you have. You do not need to lots of money to the plumbers and you can just solve most opf the problems with yourself as you see above. But in general, tgese are the general points that you need to check for the water overflow problem işn your home.

Determine Which System Overflowing

As you see abovei there are different sytems that can cuase the water overflow problem in your home. Soi you need to determine which system overflowing. After that you can think about thegeneral measurements that you can apply for the water oveflow from these systems.

Check the Water Pressure

In general if the water pressure is way too high that the systems that you have can not withsatndi the leaking and overflowing problems are the general problems that you will have with your system.

So, from the clock system of yoru main vane that comes to your home, you need to look at the water pressure that comes to your home. And if it is high, you need to choke the water with teh main vane. So, this can be the solution of your problem that you have in general.

Check Float Valves and Washers

If there is no problem with the water pressure, you need to check the float valves and washer inthe olumbing sytem that you have. In general water overflow take place because of these parts that you have for your home.

If you find the system that cuases the water overflow, you need to check the valves that this system have. And if itis toilet cistern of cental heating, you need to check tif the float valve is working well. And also if the orblem is with teh boiler, you need to check the relief valve.

Washer are also very important sealing equipments that your water system have. You need to check the sealişngs and washers that your ssystem includes. If tehre are problem with the sealings, you need to change the washers to solve the water overlofw problem that different systems that you have.

Check the Outlet Pipes

There are also outlet pipes that are working as water overlflow pipes in your systems. If there are problems with the water outlet pipes, they will not work well in case of the water overflow of teh systems that you have. So, you need to check the outlet pipes that are workişng well or not.

Conclusion on Water Overflow Problem

As you see above, there can be different cause of the water overflow i your home. You need to detect the prblem to find out the solution in a well way. And they are the general systems that can cause the water overflow porblems in your home. So, you need to check themn correctly.

In most of the cases, you do not need to pat money to the plumbing experts for all the water overflow porblems that you have. You need to examşne the prıblem by yourself to ounderstand the general solution. And most of the time, you can solve the problem on your own.

These are the general points to remember about the water overflow poroblem in the differenrt systems that you have. Finally, do not forget to leave yoru comments and questions below about th water overflow problems.

Your precious feedbacks are very important to us!

FAQs About Water Overflow